today we’re having a look at a motorized sit-stand desk…Desk Bike Flexispot… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was really positive.
It’s really easy to assemble, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s incredibly sturdy and can hold a lot of weight. Inspect out the video listed below of it running while there’s a person lying down on it if you don’t believe me.
The electric raise/lower function is not just easy to use and quick, but it’s likewise surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without offering it much thought.
On top of being functional, it also looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise helpful if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are even more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t always a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how durable the Flexispot is.
The hassle-free cable tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (given that this meant it was going to be durable) and likewise a little reluctant (due to the fact that we all understand just how much of a challenge assembling furniture can be).
Thankfully, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When assembled, I like the sleek appearance of this desk. I’m confident any of the many diverse surfaces that it is available in would look great in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and peaceful to switch in between sitting and standing as lot of times as you want throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or want to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is quite basic I attempted to get as close to that as I might on uplifts website with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation however as you should know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get doing not have even any cable grommets for go through the outdoors container
for the desktop was not damaged in any way which is utterly strange because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just very rough male if I had acquired this I ‘d have been on the phone with customer support right away they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function oddly absolutely where any sort of cable television management materials whatsoever the frame on this system is a single motor dual phase design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated also to both the dual stage double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come standard with the control panel that permits up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very quiet as in barely audible this outside a cost would be the one benefit I would give this unit over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% more affordable even if you upgrade this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift however less expensive does not suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is definitely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived damaged also my plan for this desk at this point is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at finest feels like a cheaper imitation of that it simply does not feel quality and the distinction in between this desk and my primary desk is night and day do feel free to check out their site too which likewise feels strangely similar to one of their competitors there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering various choices and accessories I could however I believe I’m happier that they only sent out a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a lot of bonus is the move when the core product isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Desk Bike Flexispot
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and performance however I would invest the additional money it’s gon na take to enter into a higher end manufacturer like uplift desk or extremely desk and I have not personally used very desk products so I can’t speak on it but their track record is very good huge thanks to flexi area for sending this out for evaluation regrettably I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed however from a consumer standpoint you ‘d most likely be really excited to get this in