today we’re having a look at a motorized sit-stand desk…Flexispot 35 Wide Plaform… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s very easy to put together, and it took my 11-year-old child and I (I mostly just monitored) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. Check out the video listed below of it running while there’s a person lying down on it if you don’t believe me.
The electrical raise/lower function is not just easy to use and fast, but it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without giving it much thought.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise handy if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are far more affordable than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just an effect of how durable the Flexispot is.
The convenient cable television tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will require to buy an anti-fatigue mat to stay comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (since this implied it was going to be strong) and also a little hesitant (because we all understand how much of a difficulty putting together furnishings can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
Once put together, I like the sleek appearance of this desk. I’m positive any of the many diverse surfaces that it can be found in would look great in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to switch in between sitting and standing as sometimes as you want throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or want to sleep on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite fundamental I tried to get as near to that as I could on uplifts website with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you must know by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get lacking even any cable television grommets for travel through the outdoors container
for the desktop was not damaged in any way which is utterly strange since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just incredibly rough guy if I had actually purchased this I ‘d have been on the phone with customer service right away they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function oddly definitely where any sort of cable television management products whatsoever the frame on this unit is a single motor dual stage style versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the double phase double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come standard with the control panel that permits up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a cost would be the one advantage I would offer this system over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift however less expensive does not suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is definitely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged too my plan for this desk at this moment is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furnishings that will last you this at best feels like a more affordable replica of that it just doesn’t feel quality and the difference between this desk and my primary desk is night and day do feel free to have a look at their website as well which likewise feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our valuable time covering numerous options and devices I might however I think I’m happier that they just sent a standard desk because as a basic desk I’m not a fan of the quality control at this price point and I don’t think slapping on a lot of additionals is the relocation when the core product isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot 35 Wide Plaform
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and performance however I would invest the additional money it’s gon na require to enter a greater end producer like uplift desk or really desk and I haven’t personally used extremely desk products so I can’t speak on it however their credibility is very good huge thanks to flexi area for sending this out for review regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged however from a customer viewpoint you ‘d most likely be actually excited to get this in