today we’re taking a look at a motorized sit-stand desk…Flexispot Alcoveriser M7L – Standing Desk Converter – Black… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s really simple to assemble, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. Check out the video listed below of it running while there’s a person lying down on it if you don’t believe me.
The electrical raise/lower feature is not just easy to use and quickly, but it’s also surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change between the two without offering it much thought.
On top of being practical, it likewise looks terrific in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a display stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also valuable if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are even more budget friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of features that I wasn’t necessarily a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how sturdy the Flexispot is.
The hassle-free cable tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (because this meant it was going to be strong) and likewise a little reluctant (due to the fact that we all know how much of a challenge putting together furnishings can be).
Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once assembled, I love the sleek appearance of this desk. I’m positive any of the many diverse surfaces that it comes in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to switch between sitting and standing as many times as you want throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as close to that as I could on uplifts site with similar configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation however as you must know by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for pass through the outside container
for the desktop was not harmed in any way which is utterly strange due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough man if I had actually bought this I ‘d have been on the phone with client service instantly they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function unusually absolutely where any kind of cable management materials whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage style that comes standard with the uplift desk this can be updated also to both the double stage dual motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come standard with the control board that allows for up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift but cheaper does not mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is absolutely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged too my prepare for this desk at this moment is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furniture that will last you this at best seems like a more affordable imitation of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to take a look at their website as well which also feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our precious time covering various alternatives and devices I could but I think I’m better that they just sent out a fundamental desk since as a basic desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a bunch of additionals is the relocation when the core product isn’t what it should be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot Alcoveriser M7L – Standing Desk Converter – Black
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and performance but I would invest the extra money it’s gon na require to get into a higher end producer like uplift desk or very desk and I have not personally utilized very desk products so I can’t speak on it however their credibility is great huge thanks to flexi spot for sending this out for review regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters got here harmed but from a consumer perspective you ‘d most likely be truly thrilled to get this in