today we’re taking a look at a motorized sit-stand desk…Flexispot Amazon De… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s really simple to assemble, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. Inspect out the video listed below of it operating while there’s a person lying down on it if you do not believe me.
The electric raise/lower function is not only easy to use and quickly, however it’s also remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without offering it much thought.
On top of being functional, it also looks terrific in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise helpful if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are much more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a substantial fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how durable the Flexispot is.
The practical cable tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfy, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (because this meant it was going to be tough) and also a little reluctant (because all of us know how much of a challenge putting together furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When assembled, I love the sleek look of this desk. I’m positive any of the many varied surfaces that it comes in would look great in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, effective, and quiet to change in between sitting and standing as often times as you want throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or wish to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is quite standard I tried to get as near to that as I could on uplifts site with comparable setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation but as you must understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable grommets for go through the outside carton
for the desktop was not damaged in any way which is entirely bizarre since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just super rough man if I had purchased this I ‘d have been on the phone with client service instantly they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function unusually absolutely where any sort of cable television management materials whatsoever the frame on this unit is a single motor double phase design versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded also to both the dual phase double motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come basic with the control board that permits up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a rate would be the one advantage I would provide this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% cheaper even if you update this flexi spot test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift but cheaper doesn’t mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is definitely shocking to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged as well my plan for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at finest seems like a cheaper imitation of that it just does not feel quality and the distinction in between this desk and my primary desk is night and day do feel free to have a look at their website too which likewise feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our valuable time covering different alternatives and accessories I might however I think I’m happier that they only sent out a fundamental desk since as a fundamental desk I’m not a fan of the quality control at this rate point and I do not think slapping on a bunch of additionals is the move when the core item isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot Amazon De
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and performance however I would spend the extra money it’s gon na take to enter into a higher end maker like uplift desk or very desk and I haven’t personally utilized extremely desk products so I can’t speak on it however their credibility is very good big thanks to flexi area for sending this out for review unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged but from a consumer viewpoint you ‘d most likely be really delighted to get this in