today we’re taking a look at a motorized sit-stand desk…Flexispot Anti Fatigue Mats… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s very simple to put together, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. Inspect out the video listed below of it operating while there’s an individual lying down on it if you do not think me.
The electrical raise/lower feature is not just easy to use and fast, however it’s likewise surprisingly smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much idea.
On top of being practical, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also valuable if your furry coworker likes to chew on or have fun with your cables.
Flexispot has choices that are even more budget friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how tough the Flexispot is.
The practical cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to remain comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (given that this implied it was going to be strong) and also a little reluctant (due to the fact that we all know how much of an obstacle assembling furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
As soon as put together, I love the streamlined appearance of this desk. I’m confident any of the many diverse finishes that it can be found in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to change between sitting and standing as often times as you want throughout the day.
Lastly, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or wish to rest on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty basic I attempted to get as close to that as I could on uplifts website with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually five inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you ought to know by now doesn’t impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable grommets for pass through the outdoors carton
for the desktop was not harmed in any way which is entirely strange since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just super rough male if I had purchased this I ‘d have been on the phone with client service immediately they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function unusually definitely where any sort of cable television management products whatsoever the frame on this unit is a single motor dual phase design versus the double motor three-stage style that comes standard with the uplift desk this can be updated also to both the dual stage dual motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come standard with the control panel that permits up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a cost would be the one benefit I would provide this unit over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% less expensive even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift however cheaper does not imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s add fuel to the fire here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is absolutely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up harmed as well my plan for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at finest seems like a more affordable imitation of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do feel free to have a look at their website also which likewise feels strangely comparable to one of their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our valuable time covering numerous choices and accessories I might but I believe I’m happier that they only sent out a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this cost point and I do not believe slapping on a bunch of extras is the move when the core product isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Anti Fatigue Mats
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and productivity but I would invest the money it’s gon na take to enter a higher end maker like uplift desk or very desk and I have not personally utilized extremely desk products so I can’t speak on it however their reputation is great big thanks to flexi spot for sending this out for review sadly I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged but from a client viewpoint you ‘d most likely be actually delighted to get this in