today we’re having a look at a motorized sit-stand desk…Flexispot App… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was really positive.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s very strong and can hold a lot of weight. If you don’t think me, check out the video below of it operating while there’s a person resting on it.
The electric raise/lower feature is not only easy to use and quick, however it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much thought.
On top of being functional, it also looks excellent in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise practical if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are much more inexpensive than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply an effect of how tough the Flexispot is.
The convenient cable tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to remain comfortable, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (since this meant it was going to be tough) and also a little reluctant (due to the fact that all of us understand how much of an obstacle putting together furniture can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the smooth appearance of this desk. I’m confident any of the many varied finishes that it comes in would look excellent in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to switch in between sitting and standing as lot of times as you want throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or wish to sleep on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as near to that as I might on uplifts website with similar setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you need to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable grommets for pass through the outside carton
for the desktop was not harmed in any way which is entirely bizarre due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough man if I had acquired this I ‘d have been on the phone with client service immediately they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function oddly definitely where any type of cable management materials whatsoever the frame on this unit is a single motor dual phase style versus the double motor three-stage style that comes standard with the uplift desk this can be updated too to both the dual stage double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come standard with the control board that permits up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one advantage I would offer this system over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift however more affordable does not indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add insult to injury here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is absolutely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged also my plan for this desk at this point is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at finest seems like a cheaper replica of that it simply doesn’t feel quality and the difference between this desk and my main desk is night and day do feel free to take a look at their site too which likewise feels strangely similar to among their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and including a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our valuable time covering numerous alternatives and accessories I might but I think I’m happier that they just sent out a basic desk because as a basic desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a lot of extras is the relocation when the core product isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Flexispot App
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and performance but I would spend the money it’s gon na require to get into a higher end producer like uplift desk or really desk and I haven’t personally used very desk items so I can’t speak on it but their reputation is great huge thanks to flexi area for sending this out for review sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters showed up damaged but from a customer perspective you ‘d most likely be really delighted to get this in