today we’re taking a look at a motorized sit-stand desk…Flexispot Comhar All-in-one Standing Desk… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s very easy to assemble, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s extremely durable and can hold a lot of weight. Inspect out the video below of it operating while there’s a person lying down on it if you don’t believe me.
The electrical raise/lower feature is not only easy to use and quick, however it’s also remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much idea.
On top of being practical, it also looks terrific in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also practical if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are far more economical than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how strong the Flexispot is.
The hassle-free cable tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (because this indicated it was going to be strong) and also a little reluctant (because all of us understand how much of an obstacle putting together furniture can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I love the streamlined appearance of this desk. I’m confident any of the many varied surfaces that it is available in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, effective, and peaceful to change in between sitting and standing as many times as you want throughout the day.
Finally, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or want to rest on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is pretty basic I tried to get as near that as I might on uplifts website with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually five inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation but as you must understand by now does not affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable grommets for pass through the outdoors container
for the desktop was not harmed in any way which is entirely bizarre due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough guy if I had purchased this I ‘d have been on the phone with customer service immediately they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function strangely definitely where any sort of cable management products whatsoever the frame on this system is a single motor dual phase design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage double motor which presses the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come basic with the control board that permits up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however more affordable does not mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged as well my prepare for this desk at this moment is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furniture that will last you this at best feels like a cheaper replica of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to take a look at their website too which likewise feels strangely comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our valuable time covering various alternatives and accessories I might but I think I’m better that they just sent a fundamental desk since as a fundamental desk I’m not a fan of the quality control at this cost point and I do not think slapping on a bunch of additionals is the relocation when the core item isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years very desk is 5 years and uplift desk is 7 years if you are Flexispot Comhar All-in-one Standing Desk
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and productivity but I would invest the additional money it’s gon na require to enter a higher end manufacturer like uplift desk or extremely desk and I have not personally used very desk items so I can’t speak on it but their credibility is very good huge thanks to flexi area for sending this out for review sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters showed up damaged however from a client perspective you ‘d most likely be really thrilled to get this in