Find Flexispot Customer Service 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot Customer Service… you may have seen my review on the uplift desk, if not …

In general, I need to state I like the Flexispot E7.

here are lots of things to enjoy about the Flexispot E7. In general, my experience was very favorable.

It’s very easy to put together, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s very tough and can hold a lot of weight. If you do not think me, have a look at the video listed below of it operating while there’s an individual lying down on it.

The electrical raise/lower function is not only easy to use and fast, however it’s likewise remarkably smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much idea.
On top of being functional, it also looks great in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise handy if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are far more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t always a huge fan of:

The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just a consequence of how sturdy the Flexispot is.
The practical cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will require to buy an anti-fatigue mat to remain comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.

When it showed up and I saw how heavy it was, I was both ecstatic (considering that this suggested it was going to be durable) and likewise a little hesitant (because all of us know just how much of an obstacle putting together furnishings can be).

Luckily, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t discussed well in the directions.

As soon as assembled, I love the smooth appearance of this desk. I’m confident any of the many diverse surfaces that it comes in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.

The peaceful operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as many times as you want throughout the day.

Finally, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or want to rest on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.

 

in that video is quite kitted out as the desk we’re taking a look at today is quite basic I tried to get as close to that as I could on uplifts site with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you ought to understand by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable television grommets for pass through the outdoors container

for the desktop was not harmed in any way which is entirely bizarre since I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just very rough male if I had actually bought this I ‘d have been on the phone with customer support instantly they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function unusually absolutely where any type of cable management products whatsoever the frame on this system is a single motor dual stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the double stage double motor and a three-stage dual motor which pushes the cost of the desk up

an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come basic with the control panel that permits up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one advantage I would give this unit over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% less expensive even if you update this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but more affordable doesn’t mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when

this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up harmed too my plan for this desk at this point is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furniture that will last you this at finest feels like a less expensive imitation of that it simply does not feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to check out their website also which likewise feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our precious time covering various alternatives and accessories I could however I think I’m better that they only sent a standard desk since as a fundamental desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a lot of additionals is the relocation when the core product isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Customer Service

in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and performance however I would spend the extra money it’s gon na take to get into a greater end manufacturer like uplift desk or really desk and I haven’t personally used very desk products so I can’t speak on it however their credibility is very good big thanks to flexi spot for sending this out for review sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with seeing as how both the desktop and the casters got here damaged however from a client standpoint you ‘d probably be actually excited to get this in

Published