today we’re taking a look at a motorized sit-stand desk…Flexispot Desk En1… you may have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s very simple to put together, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s super strong and can hold a lot of weight. Check out the video listed below of it operating while there’s a person lying down on it if you do not think me.
The electric raise/lower function is not just easy to use and fast, but it’s also surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much idea.
On top of being practical, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise useful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are even more budget-friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a substantial fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is just an effect of how strong the Flexispot is.
The practical cable tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (considering that this meant it was going to be sturdy) and also a little reluctant (since all of us understand just how much of a challenge putting together furniture can be).
Thankfully, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
Once assembled, I enjoy the sleek look of this desk. I’m positive any of the many diverse surfaces that it comes in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as many times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or wish to sleep on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is pretty standard I tried to get as near to that as I could on uplifts website with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you should know by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get lacking even any cable television grommets for pass through the outdoors container
for the desktop was not harmed in any way which is entirely strange because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just super rough man if I had acquired this I ‘d have been on the phone with customer support instantly they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function oddly absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor double phase design versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated as well to both the double stage double motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come standard with the control panel that allows for up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift however less expensive doesn’t imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed as well my prepare for this desk at this point is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at finest feels like a cheaper imitation of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to have a look at their website too which likewise feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our valuable time covering different alternatives and accessories I might however I think I’m happier that they just sent a basic desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this cost point and I do not think slapping on a bunch of additionals is the move when the core item isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Flexispot Desk En1
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and performance but I would invest the extra money it’s gon na require to enter a higher end manufacturer like uplift desk or very desk and I have not personally utilized extremely desk products so I can’t speak on it however their track record is great big thanks to flexi area for sending this out for review sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters arrived harmed however from a client perspective you ‘d probably be actually thrilled to get this in