today we’re having a look at a motorized sit-stand desk…Flexispot Desk Rst… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s super strong and can hold a lot of weight. If you do not believe me, take a look at the video below of it running while there’s an individual lying down on it.
The electrical raise/lower function is not only easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change between the two without offering it much idea.
On top of being functional, it likewise looks fantastic in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also helpful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has options that are much more cost effective than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a substantial fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how sturdy the Flexispot is.
The convenient cable television tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (because this suggested it was going to be strong) and likewise a little hesitant (because we all know just how much of an obstacle putting together furnishings can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once put together, I like the sleek appearance of this desk. I’m positive any of the many diverse finishes that it can be found in would look terrific in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as often times as you desire throughout the day.
Lastly, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or want to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is pretty standard I attempted to get as near to that as I could on uplifts website with comparable setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation but as you should know by now does not affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get lacking even any cable television grommets for pass through the outside container
for the desktop was not damaged in any way which is utterly strange because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just extremely rough guy if I had actually acquired this I ‘d have been on the phone with customer service immediately they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function strangely absolutely where any sort of cable television management materials whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the dual phase dual motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come basic with the control panel that permits up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% cheaper even if you update this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however less expensive does not suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed as well my prepare for this desk at this point is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at finest feels like a less expensive replica of that it simply does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to have a look at their website as well which also feels eerily similar to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering numerous choices and accessories I might however I believe I’m better that they just sent a fundamental desk because as a fundamental desk I’m not a fan of the quality control at this cost point and I do not think slapping on a lot of extras is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Desk Rst
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and performance however I would invest the extra money it’s gon na take to get into a higher end manufacturer like uplift desk or very desk and I haven’t personally utilized really desk items so I can’t speak on it however their track record is excellent big thanks to flexi area for sending this out for review sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters got here damaged however from a consumer standpoint you ‘d probably be really delighted to get this in