today we’re having a look at a motorized sit-stand desk…Flexispot Deskcise Protm… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s extremely easy to put together, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s super tough and can hold a lot of weight. Check out the video below of it running while there’s a person lying down on it if you do not believe me.
The electrical raise/lower function is not just easy to use and quick, however it’s also remarkably smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much thought.
On top of being practical, it likewise looks excellent in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise useful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are even more affordable than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t always a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how durable the Flexispot is.
The hassle-free cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfy, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (because this suggested it was going to be tough) and also a little reluctant (due to the fact that we all know just how much of a challenge assembling furniture can be).
Luckily, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When put together, I enjoy the smooth look of this desk. I’m positive any of the many varied surfaces that it can be found in would look great in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, effective, and quiet to switch between sitting and standing as often times as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or wish to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is quite basic I tried to get as near that as I could on uplifts website with comparable configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you must understand by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get doing not have even any cable television grommets for go through the outdoors container
for the desktop was not damaged in any way which is utterly unusual since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply incredibly rough man if I had actually acquired this I ‘d have been on the phone with customer support instantly they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely definitely where any kind of cable television management products whatsoever the frame on this system is a single motor dual stage style versus the double motor three-stage style that comes standard with the uplift desk this can be updated as well to both the double stage dual motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come standard with the control panel that enables up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a price would be the one benefit I would provide this unit over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% less expensive even if you update this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift but more affordable does not imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed too my plan for this desk at this moment is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at best feels like a cheaper imitation of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do feel free to check out their website too which also feels strangely comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering various choices and devices I could however I believe I’m better that they just sent out a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this rate point and I do not think slapping on a bunch of additionals is the move when the core item isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Flexispot Deskcise Protm
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and productivity but I would invest the extra money it’s gon na require to enter a higher end maker like uplift desk or really desk and I have not personally utilized extremely desk items so I can’t speak on it but their track record is excellent big thanks to flexi spot for sending this out for evaluation sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with seeing as how both the desktop and the casters got here harmed but from a customer standpoint you ‘d probably be actually delighted to get this in