today we’re taking a look at a motorized sit-stand desk…Flexispot E20… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s very simple to put together, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s incredibly sturdy and can hold a lot of weight. If you don’t think me, have a look at the video listed below of it operating while there’s a person lying down on it.
The electric raise/lower feature is not only easy to use and quick, but it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much idea.
On top of being practical, it also looks fantastic in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also useful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are far more cost effective than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a substantial fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how tough the Flexispot is.
The hassle-free cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (because this meant it was going to be strong) and also a little hesitant (since we all know just how much of a difficulty assembling furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When put together, I enjoy the smooth appearance of this desk. I’m positive any of the many varied finishes that it can be found in would look excellent in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and quiet to switch between sitting and standing as often times as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a large desktop (or wish to take a nap on it for some reason) it has you covered. It will likewise equally distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is pretty basic I tried to get as near that as I might on uplifts website with similar setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really 5 inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation but as you ought to know by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get doing not have even any cable grommets for travel through the outside carton
for the desktop was not damaged in any way which is absolutely strange since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just extremely rough man if I had actually bought this I ‘d have been on the phone with customer support immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function oddly definitely where any type of cable management materials whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the dual phase double motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come standard with the control panel that permits up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is very peaceful as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift but more affordable does not indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely shocking to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged as well my prepare for this desk at this moment is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furniture that will last you this at best seems like a more affordable imitation of that it simply does not feel quality and the difference in between this desk and my main desk is night and day do feel free to have a look at their website too which likewise feels strangely similar to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering numerous options and accessories I might but I think I’m better that they only sent a fundamental desk since as a fundamental desk I’m not a fan of the quality control at this rate point and I do not think slapping on a bunch of bonus is the relocation when the core item isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot E20
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of gaming and productivity but I would spend the additional money it’s gon na require to enter a higher end maker like uplift desk or extremely desk and I haven’t personally used very desk items so I can’t speak on it but their track record is very good huge thanks to flexi area for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters arrived harmed however from a client perspective you ‘d probably be really excited to get this in