Find Flexispot Ec1 Standing Desk Review 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot Ec1 Standing Desk Review… you may have seen my review on the uplift desk, if not …

In general, I should state I like the Flexispot E7.

here are lots of things to like about the Flexispot E7. In general, my experience was extremely positive.

It’s very easy to put together, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s extremely strong and can hold a lot of weight. If you do not think me, take a look at the video listed below of it running while there’s an individual resting on it.

The electric raise/lower function is not only easy to use and fast, but it’s also remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without offering it much idea.
On top of being functional, it likewise looks terrific in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also useful if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are even more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t necessarily a huge fan of:

The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just an effect of how strong the Flexispot is.
The hassle-free cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.

When it showed up and I saw how heavy it was, I was both fired up (given that this indicated it was going to be durable) and likewise a little hesitant (since we all know just how much of a challenge putting together furniture can be).

The good news is, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the instructions.

Once assembled, I enjoy the smooth look of this desk. I’m positive any of the many diverse finishes that it can be found in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.

The peaceful operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as many times as you desire throughout the day.

Finally, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or want to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.

 

because video is quite kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as near that as I might on uplifts website with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review but as you must understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get doing not have even any cable grommets for travel through the outside container

for the desktop was not damaged in any way which is entirely bizarre since I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough guy if I had actually purchased this I ‘d have been on the phone with customer service immediately they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually absolutely where any sort of cable management products whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage style that comes standard with the uplift desk this can be updated too to both the dual phase dual motor and a three-stage double motor which presses the cost of the desk up

an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this model does come basic with the control board that allows for up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one benefit I would give this unit over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift however more affordable doesn’t suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when

this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed as well my prepare for this desk at this point is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furniture that will last you this at best feels like a cheaper replica of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do feel free to check out their site as well which likewise feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our precious time covering various alternatives and devices I could however I believe I’m better that they just sent a fundamental desk due to the fact that as a basic desk I’m not a fan of the quality control at this rate point and I don’t believe slapping on a bunch of additionals is the move when the core product isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Ec1 Standing Desk Review

in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and efficiency but I would spend the additional money it’s gon na take to enter a greater end maker like uplift desk or really desk and I haven’t personally used very desk products so I can’t speak on it but their credibility is great big thanks to flexi spot for sending this out for review regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters got here damaged however from a consumer perspective you ‘d most likely be really delighted to get this in

Published