today we’re having a look at a motorized sit-stand desk…Flexispot Eg1 Assembly… you may have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I mainly just monitored) under an hour from start to finish.
It’s extremely tough and can hold a great deal of weight. Examine out the video below of it operating while there’s an individual lying down on it if you don’t think me.
The electrical raise/lower function is not just easy to use and quick, however it’s also surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without giving it much thought.
On top of being functional, it also looks excellent in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also helpful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are much more affordable than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a huge fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how sturdy the Flexispot is.
The practical cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (given that this suggested it was going to be sturdy) and also a little reluctant (because all of us understand how much of a challenge assembling furnishings can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I like the smooth look of this desk. I’m confident any of the many varied finishes that it is available in would look great in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and peaceful to change in between sitting and standing as sometimes as you desire throughout the day.
Last but not least, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or want to rest on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is pretty standard I attempted to get as near that as I might on uplifts website with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you need to know by now doesn’t impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for travel through the outside carton
for the desktop was not damaged in any way which is absolutely bizarre since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough man if I had actually bought this I ‘d have been on the phone with customer care right away they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function oddly absolutely where any sort of cable television management materials whatsoever the frame on this system is a single motor dual stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the dual phase double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this design does come basic with the control panel that allows for up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a cost would be the one benefit I would give this unit over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% cheaper even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift however less expensive doesn’t indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed as well my plan for this desk at this point is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furniture that will last you this at best seems like a cheaper imitation of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to check out their site also which likewise feels strangely comparable to among their competitors there’s a wealth of devices you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering various choices and accessories I could however I think I’m happier that they only sent out a fundamental desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a lot of extras is the move when the core item isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years extremely desk is five years and uplift desk is 7 years if you are Flexispot Eg1 Assembly
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and performance but I would invest the extra money it’s gon na require to get into a greater end manufacturer like uplift desk or extremely desk and I have not personally utilized very desk products so I can’t speak on it but their track record is excellent huge thanks to flexi area for sending this out for review regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters got here damaged but from a customer perspective you ‘d probably be really excited to get this in