today we’re having a look at a motorized sit-stand desk…Flexispot Electric Standing Desk… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s very strong and can hold a great deal of weight. Inspect out the video below of it running while there’s an individual lying down on it if you do not believe me.
The electrical raise/lower function is not just easy to use and fast, however it’s likewise remarkably smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much idea.
On top of being functional, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also practical if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are even more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a substantial fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The practical cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will require to purchase an anti-fatigue mat to remain comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (since this implied it was going to be strong) and likewise a little reluctant (due to the fact that we all understand just how much of an obstacle assembling furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the streamlined look of this desk. I’m confident any of the many diverse finishes that it comes in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as lot of times as you want throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or want to take a nap on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty standard I tried to get as near that as I could on uplifts site with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review however as you need to understand by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get doing not have even any cable grommets for go through the outside container
for the desktop was not damaged in any way which is utterly bizarre since I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough male if I had bought this I ‘d have been on the phone with customer service right away they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function unusually absolutely where any sort of cable management materials whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated too to both the dual phase dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come standard with the control board that permits up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one advantage I would give this system over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift but more affordable does not suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add insult to injury here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed too my plan for this desk at this point is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at best feels like a more affordable replica of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do feel free to have a look at their website also which likewise feels strangely similar to among their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering various alternatives and devices I could however I think I’m better that they just sent out a fundamental desk since as a standard desk I’m not a fan of the quality control at this rate point and I do not think slapping on a bunch of additionals is the move when the core item isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years really desk is 5 years and uplift desk is seven years if you are Flexispot Electric Standing Desk
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and efficiency however I would spend the money it’s gon na require to get into a higher end manufacturer like uplift desk or very desk and I haven’t personally used very desk items so I can’t speak on it but their credibility is great big thanks to flexi spot for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters showed up harmed however from a customer viewpoint you ‘d probably be truly thrilled to get this in