today we’re taking a look at a motorized sit-stand desk…Flexispot Eq5 Review… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s very simple to put together, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s super strong and can hold a lot of weight. If you do not think me, have a look at the video listed below of it operating while there’s a person resting on it.
The electric raise/lower feature is not just easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much idea.
On top of being functional, it likewise looks terrific in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also valuable if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are far more economical than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The hassle-free cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this meant it was going to be durable) and also a little reluctant (due to the fact that we all understand just how much of a challenge assembling furniture can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
Once assembled, I like the sleek look of this desk. I’m positive any of the many diverse surfaces that it is available in would look terrific in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as lot of times as you want throughout the day.
Finally, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a hefty home computer (or wish to sleep on it for some reason) it has you covered. It will likewise equally disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is pretty basic I attempted to get as close to that as I might on uplifts website with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation but as you must understand by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for travel through the outside carton
for the desktop was not damaged in any way which is utterly unusual due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough man if I had bought this I ‘d have been on the phone with customer support immediately they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function oddly absolutely where any sort of cable management products whatsoever the frame on this system is a single motor dual stage style versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded too to both the double stage double motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come basic with the control board that allows for up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% cheaper even if you update this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift however cheaper does not suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is absolutely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived damaged as well my plan for this desk at this point is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furnishings that will last you this at finest feels like a cheaper imitation of that it simply doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to check out their site too which also feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our valuable time covering different options and accessories I might however I believe I’m better that they only sent a basic desk due to the fact that as a basic desk I’m not a fan of the quality control at this price point and I do not think slapping on a lot of extras is the relocation when the core item isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Eq5 Review
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and efficiency but I would spend the additional money it’s gon na require to enter into a higher end producer like uplift desk or extremely desk and I have not personally used extremely desk products so I can’t speak on it but their credibility is very good huge thanks to flexi spot for sending this out for evaluation sadly I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged however from a customer perspective you ‘d probably be actually delighted to get this in