today we’re having a look at a motorized sit-stand desk…Flexispot F6Ad… you might have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really positive.
It’s really simple to assemble, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s extremely strong and can hold a lot of weight. If you don’t believe me, check out the video below of it operating while there’s a person lying down on it.
The electric raise/lower feature is not only easy to use and quick, but it’s also remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much thought.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise useful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are much more cost effective than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a consequence of how sturdy the Flexispot is.
The practical cable television tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to remain comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (given that this meant it was going to be strong) and likewise a little hesitant (since we all know just how much of an obstacle assembling furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
When assembled, I love the sleek appearance of this desk. I’m confident any of the many varied finishes that it comes in would look terrific in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, effective, and peaceful to change in between sitting and standing as many times as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or want to rest on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as near that as I might on uplifts website with comparable setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is really five inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review but as you should know by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get doing not have even any cable television grommets for pass through the outdoors container
for the desktop was not damaged in any way which is absolutely bizarre since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just incredibly rough guy if I had bought this I ‘d have been on the phone with customer service immediately they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function unusually definitely where any sort of cable management materials whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated too to both the double phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come basic with the control board that allows for up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% more affordable even if you update this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but cheaper does not mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged as well my plan for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furnishings that will last you this at finest feels like a cheaper imitation of that it just doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to have a look at their site also which also feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our valuable time covering various options and accessories I could but I believe I’m happier that they only sent a basic desk due to the fact that as a standard desk I’m not a fan of the quality control at this rate point and I don’t think slapping on a bunch of bonus is the move when the core item isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot F6Ad
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and productivity however I would spend the money it’s gon na require to get into a greater end producer like uplift desk or really desk and I haven’t personally utilized really desk items so I can’t speak on it however their reputation is excellent big thanks to flexi area for sending this out for evaluation unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up damaged but from a consumer standpoint you ‘d most likely be truly excited to get this in