today we’re having a look at a motorized sit-stand desk…Flexispot Height Adjustable Standing Desk Riser With Removable Keyboard Tray… you might have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s really simple to assemble, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s super sturdy and can hold a great deal of weight. If you do not believe me, take a look at the video listed below of it operating while there’s an individual resting on it.
The electrical raise/lower feature is not only easy to use and fast, however it’s likewise surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much idea.
On top of being practical, it also looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also useful if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are far more budget-friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how sturdy the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t very clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (because this implied it was going to be strong) and also a little hesitant (since we all understand how much of an obstacle assembling furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
When assembled, I enjoy the sleek look of this desk. I’m positive any of the many varied surfaces that it can be found in would look great in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to change between sitting and standing as sometimes as you desire throughout the day.
Finally, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty basic I tried to get as close to that as I could on uplifts site with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation but as you ought to know by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get doing not have even any cable television grommets for go through the outdoors carton
for the desktop was not harmed in any way which is entirely unusual because I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just super rough guy if I had actually bought this I ‘d have been on the phone with customer service instantly they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function unusually absolutely where any type of cable television management products whatsoever the frame on this unit is a single motor double stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated also to both the dual phase dual motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come basic with the control panel that allows for up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a cost would be the one benefit I would give this unit over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however more affordable doesn’t indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged also my prepare for this desk at this point is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at finest feels like a more affordable imitation of that it simply does not feel quality and the difference between this desk and my primary desk is night and day do feel free to check out their site too which likewise feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering numerous alternatives and devices I might but I believe I’m better that they just sent out a basic desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a bunch of additionals is the relocation when the core item isn’t what it should be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot Height Adjustable Standing Desk Riser With Removable Keyboard Tray
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and performance however I would invest the additional money it’s gon na require to get into a greater end manufacturer like uplift desk or extremely desk and I haven’t personally utilized extremely desk products so I can’t speak on it but their credibility is very good big thanks to flexi area for sending this out for evaluation unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters arrived damaged however from a consumer perspective you ‘d probably be truly excited to get this in