Find Flexispot Kana Pro 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot Kana Pro… you might have seen my review on the uplift desk, if not …

In general, I must say I like the Flexispot E7.

here are a lot of things to like about the Flexispot E7. In general, my experience was very favorable.

It’s very simple to assemble, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s super sturdy and can hold a great deal of weight. If you do not think me, take a look at the video listed below of it operating while there’s a person resting on it.

The electrical raise/lower function is not only easy to use and quick, however it’s likewise surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much idea.
On top of being practical, it likewise looks excellent in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise useful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are far more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a substantial fan of:

The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how tough the Flexispot is.
The practical cable television tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.

When it got here and I saw how heavy it was, I was both fired up (because this indicated it was going to be strong) and likewise a little reluctant (because we all understand just how much of an obstacle putting together furnishings can be).

Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.

When assembled, I love the smooth appearance of this desk. I’m confident any of the many varied finishes that it can be found in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.

The peaceful operation and height memory settings make it simple, efficient, and quiet to change between sitting and standing as often times as you desire throughout the day.

Lastly, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or wish to sleep on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.

 

because video is pretty kitted out as the desk we’re taking a look at today is pretty standard I attempted to get as near that as I could on uplifts website with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review however as you must know by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get doing not have even any cable grommets for travel through the outside carton

for the desktop was not damaged in any way which is entirely unusual since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just extremely rough guy if I had acquired this I ‘d have been on the phone with customer care immediately they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function oddly definitely where any type of cable management materials whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage design that comes standard with the uplift desk this can be updated also to both the dual phase double motor and a three-stage double motor which presses the expense of the desk up

an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come basic with the control board that permits up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one advantage I would give this unit over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% more affordable even if you upgrade this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but cheaper doesn’t indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when

this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely frustrating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed also my prepare for this desk at this point is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at finest seems like a cheaper replica of that it simply doesn’t feel quality and the distinction between this desk and my main desk is night and day do feel free to take a look at their website also which likewise feels eerily similar to among their competitors there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our valuable time covering various options and devices I could but I think I’m better that they only sent out a basic desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a lot of extras is the move when the core item isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Kana Pro

in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the extra money it’s gon na take to enter into a greater end producer like uplift desk or really desk and I have not personally used really desk items so I can’t speak on it however their reputation is great huge thanks to flexi spot for sending this out for evaluation regrettably I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters arrived harmed but from a customer standpoint you ‘d probably be really delighted to get this in

Published