today we’re taking a look at a motorized sit-stand desk…Flexispot M2B Standing Desk… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s really easy to put together, and it took my 11-year-old child and I (I primarily simply monitored) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. If you do not think me, check out the video listed below of it operating while there’s a person resting on it.
The electric raise/lower function is not only easy to use and quickly, however it’s likewise surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much idea.
On top of being practical, it also looks excellent in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also useful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are far more inexpensive than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a huge fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a consequence of how sturdy the Flexispot is.
The hassle-free cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (since this indicated it was going to be durable) and likewise a little reluctant (because all of us know just how much of an obstacle putting together furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
As soon as put together, I like the streamlined appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look great in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, efficient, and quiet to change between sitting and standing as many times as you desire throughout the day.
Lastly, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or wish to sleep on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as near that as I could on uplifts site with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you ought to know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get doing not have even any cable grommets for travel through the outside carton
for the desktop was not harmed in any way which is utterly bizarre because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply very rough male if I had actually bought this I ‘d have been on the phone with customer support immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function strangely absolutely where any kind of cable management products whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the double stage double motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come basic with the control board that permits up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one benefit I would offer this unit over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% less expensive even if you update this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however less expensive does not indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is absolutely infuriating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters arrived damaged too my plan for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at finest feels like a less expensive imitation of that it just doesn’t feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to have a look at their website also which likewise feels strangely similar to among their competitors there’s a wealth of devices you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our valuable time covering various options and accessories I could but I believe I’m happier that they only sent a fundamental desk because as a basic desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a lot of additionals is the relocation when the core item isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot M2B Standing Desk
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and performance however I would invest the additional money it’s gon na require to enter into a greater end producer like uplift desk or really desk and I have not personally used extremely desk items so I can’t speak on it but their track record is very good big thanks to flexi spot for sending this out for review sadly I can not recommend this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged however from a consumer standpoint you ‘d probably be really excited to get this in