today we’re having a look at a motorized sit-stand desk…Flexispot Metal Height Adjustable Standing Desk Riser… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s very simple to put together, and it took my 11-year-old daughter and I (I mainly simply monitored) under an hour from start to finish.
It’s very tough and can hold a lot of weight. Examine out the video below of it operating while there’s an individual lying down on it if you do not think me.
The electric raise/lower function is not only easy to use and fast, however it’s likewise surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much thought.
On top of being practical, it also looks terrific in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also helpful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are even more budget-friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a big fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how durable the Flexispot is.
The practical cable television tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (given that this suggested it was going to be tough) and also a little reluctant (due to the fact that all of us understand just how much of a challenge putting together furniture can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
When put together, I like the sleek appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to switch between sitting and standing as often times as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or wish to rest on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is quite standard I attempted to get as near to that as I could on uplifts site with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review however as you ought to know by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get doing not have even any cable grommets for travel through the outdoors carton
for the desktop was not harmed in any way which is utterly strange because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough man if I had acquired this I ‘d have been on the phone with customer care right away they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function unusually absolutely where any kind of cable management materials whatsoever the frame on this system is a single motor double phase design versus the double motor three-stage style that comes requirement with the uplift desk this can be updated too to both the dual phase double motor and a three-stage double motor which presses the expense of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come standard with the control board that enables up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one benefit I would give this system over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however less expensive does not mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is absolutely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed as well my plan for this desk at this point is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furniture that will last you this at best feels like a less expensive replica of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do feel free to check out their website also which also feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our valuable time covering numerous choices and devices I could however I believe I’m better that they only sent a standard desk because as a standard desk I’m not a fan of the quality control at this cost point and I do not think slapping on a bunch of bonus is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot Metal Height Adjustable Standing Desk Riser
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and efficiency but I would invest the extra money it’s gon na take to enter into a greater end maker like uplift desk or extremely desk and I have not personally used extremely desk items so I can’t speak on it but their credibility is great big thanks to flexi spot for sending this out for evaluation regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters got here damaged however from a customer standpoint you ‘d most likely be truly delighted to get this in