today we’re having a look at a motorized sit-stand desk…Flexispot Mount… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s very strong and can hold a lot of weight. If you do not think me, check out the video listed below of it running while there’s an individual lying down on it.
The electrical raise/lower feature is not just easy to use and fast, but it’s likewise remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much idea.
On top of being functional, it also looks excellent in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise helpful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has choices that are much more inexpensive than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how sturdy the Flexispot is.
The hassle-free cable tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to stay comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (considering that this suggested it was going to be strong) and likewise a little reluctant (since all of us know just how much of an obstacle putting together furnishings can be).
Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
When assembled, I enjoy the streamlined look of this desk. I’m positive any of the many diverse finishes that it comes in would look great in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, efficient, and quiet to change in between sitting and standing as often times as you want throughout the day.
Last but not least, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or wish to take a nap on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite basic I tried to get as near to that as I could on uplifts site with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is really five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you must understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get doing not have even any cable grommets for go through the outside container
for the desktop was not harmed in any way which is entirely bizarre since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough guy if I had acquired this I ‘d have been on the phone with customer support right away they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function oddly definitely where any sort of cable management products whatsoever the frame on this unit is a single motor dual phase style versus the dual motor three-stage design that comes standard with the uplift desk this can be updated as well to both the double phase double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come standard with the control board that permits up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a rate would be the one benefit I would give this unit over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper doesn’t mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged too my prepare for this desk at this point is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furniture that will last you this at best seems like a less expensive imitation of that it just doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to have a look at their website as well which also feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our precious time covering various alternatives and devices I might however I think I’m happier that they just sent a standard desk since as a fundamental desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a bunch of bonus is the move when the core product isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Mount
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the additional money it’s gon na require to get into a higher end manufacturer like uplift desk or very desk and I have not personally utilized extremely desk items so I can’t speak on it however their reputation is excellent huge thanks to flexi spot for sending this out for evaluation sadly I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters arrived damaged however from a client perspective you ‘d most likely be really thrilled to get this in