today we’re having a look at a motorized sit-stand desk…Flexispot Northampton… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was very positive.
It’s extremely easy to assemble, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. If you do not think me, check out the video listed below of it running while there’s a person resting on it.
The electrical raise/lower feature is not just easy to use and quickly, however it’s also surprisingly smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much idea.
On top of being practical, it likewise looks excellent in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also valuable if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are even more inexpensive than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just an effect of how durable the Flexispot is.
The practical cable tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will require to buy an anti-fatigue mat to stay comfy, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (given that this suggested it was going to be durable) and also a little hesitant (due to the fact that we all understand how much of a difficulty assembling furniture can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
When put together, I love the sleek look of this desk. I’m confident any of the many varied finishes that it is available in would look great in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, efficient, and quiet to switch in between sitting and standing as lot of times as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop (or wish to rest on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is pretty standard I tried to get as near that as I could on uplifts website with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you need to know by now doesn’t impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get lacking even any cable television grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is entirely unusual since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just super rough man if I had acquired this I ‘d have been on the phone with customer support right away they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function strangely definitely where any sort of cable management materials whatsoever the frame on this system is a single motor dual phase design versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated also to both the double stage dual motor and a three-stage double motor which presses the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come basic with the control board that permits up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a rate would be the one benefit I would provide this system over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% cheaper even if you update this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift however cheaper does not imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s rub salt in the wound here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is absolutely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged also my plan for this desk at this point is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at finest seems like a more affordable imitation of that it simply does not feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to have a look at their site also which also feels eerily similar to among their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering various alternatives and accessories I might however I think I’m happier that they just sent out a standard desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a bunch of extras is the relocation when the core item isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Northampton
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and productivity however I would invest the additional money it’s gon na require to get into a greater end manufacturer like uplift desk or very desk and I haven’t personally utilized extremely desk items so I can’t speak on it but their track record is great huge thanks to flexi spot for sending this out for review regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters showed up harmed but from a consumer perspective you ‘d probably be truly thrilled to get this in