today we’re having a look at a motorized sit-stand desk…Flexispot Plastic… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mostly simply monitored) under an hour from start to finish.
It’s super strong and can hold a great deal of weight. If you do not believe me, take a look at the video below of it operating while there’s a person lying down on it.
The electric raise/lower function is not only easy to use and quick, but it’s also remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change between the two without giving it much idea.
On top of being functional, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise helpful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are even more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how durable the Flexispot is.
The practical cable television tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (since this implied it was going to be sturdy) and likewise a little hesitant (because all of us know how much of a challenge putting together furnishings can be).
Luckily, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When put together, I love the sleek look of this desk. I’m positive any of the many varied surfaces that it comes in would look excellent in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to switch between sitting and standing as often times as you desire throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or want to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is quite fundamental I attempted to get as close to that as I could on uplifts site with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review however as you need to know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get doing not have even any cable television grommets for go through the outdoors carton
for the desktop was not damaged in any way which is entirely unusual since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply very rough man if I had purchased this I ‘d have been on the phone with customer care right away they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually definitely where any type of cable management materials whatsoever the frame on this system is a single motor dual phase design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated too to both the double phase double motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come standard with the control board that enables up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a rate would be the one advantage I would give this system over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but less expensive doesn’t suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is absolutely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged as well my plan for this desk at this point is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furniture that will last you this at best feels like a less expensive replica of that it simply doesn’t feel quality and the difference between this desk and my main desk is night and day do feel free to check out their site also which likewise feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our valuable time covering various alternatives and accessories I might however I believe I’m happier that they just sent out a basic desk since as a standard desk I’m not a fan of the quality control at this price point and I do not believe slapping on a lot of extras is the move when the core product isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot Plastic
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and performance however I would invest the extra money it’s gon na take to enter a higher end manufacturer like uplift desk or really desk and I have not personally used very desk items so I can’t speak on it but their reputation is great huge thanks to flexi area for sending this out for review regrettably I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters arrived harmed however from a customer standpoint you ‘d most likely be really excited to get this in