today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Corner Desk… you may have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s really easy to assemble, and it took my 11-year-old child and I (I primarily simply monitored) under an hour from start to finish.
It’s extremely strong and can hold a lot of weight. If you don’t believe me, take a look at the video below of it operating while there’s an individual lying down on it.
The electrical raise/lower feature is not only easy to use and fast, but it’s also remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much idea.
On top of being practical, it likewise looks terrific in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise valuable if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are far more cost effective than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t always a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply an effect of how sturdy the Flexispot is.
The hassle-free cable television tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (considering that this meant it was going to be sturdy) and likewise a little hesitant (since we all know just how much of a challenge putting together furniture can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the guidelines.
Is it worth getting a standing desk?
Once put together, I love the streamlined look of this desk. I’m positive any of the many varied surfaces that it can be found in would look excellent in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to change in between sitting and standing as often times as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or wish to take a nap on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite standard I tried to get as near that as I could on uplifts site with similar setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation but as you must know by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get doing not have even any cable television grommets for go through the outside container
for the desktop was not damaged in any way which is absolutely bizarre due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just incredibly rough man if I had actually bought this I ‘d have been on the phone with client service immediately they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function oddly definitely where any kind of cable television management products whatsoever the frame on this system is a single motor dual stage style versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the double stage double motor and a three-stage double motor which presses the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come standard with the control board that permits up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a rate would be the one advantage I would offer this system over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift however more affordable does not suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s add fuel to the fire here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is definitely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed also my prepare for this desk at this moment is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at finest feels like a more affordable imitation of that it simply does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to check out their website as well which also feels eerily similar to one of their rivals there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering different options and devices I might but I think I’m better that they just sent a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of bonus is the relocation when the core item isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Standing Corner Desk
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the extra money it’s gon na take to enter into a greater end manufacturer like uplift desk or really desk and I have not personally used extremely desk items so I can’t speak on it however their reputation is great huge thanks to flexi area for sending this out for evaluation regrettably I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters got here harmed however from a customer standpoint you ‘d probably be really excited to get this in