today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk Monitor Mount… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to put together, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s incredibly sturdy and can hold a lot of weight. Inspect out the video listed below of it running while there’s a person lying down on it if you don’t believe me.
The electric raise/lower function is not only easy to use and quick, however it’s likewise remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without offering it much thought.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also practical if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are far more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just an effect of how sturdy the Flexispot is.
The convenient cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (since this indicated it was going to be sturdy) and likewise a little hesitant (since all of us understand how much of an obstacle putting together furniture can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
As soon as put together, I enjoy the streamlined look of this desk. I’m positive any of the many varied finishes that it can be found in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as sometimes as you want throughout the day.
Lastly, this desk is durable. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or wish to rest on it for some reason) it has you covered. It will likewise equally disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is pretty basic I attempted to get as near to that as I might on uplifts website with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review but as you need to understand by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get lacking even any cable television grommets for travel through the outside container
for the desktop was not harmed in any way which is entirely unusual because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had actually acquired this I ‘d have been on the phone with customer service immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function oddly absolutely where any type of cable television management materials whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be updated too to both the dual phase double motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come standard with the control panel that allows for up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very peaceful as in barely audible this outside a cost would be the one benefit I would offer this system over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift however more affordable does not mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is definitely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed as well my plan for this desk at this moment is to lose the desk top and came with all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furniture that will last you this at best feels like a more affordable imitation of that it just does not feel quality and the difference between this desk and my main desk is night and day do feel free to take a look at their website also which also feels eerily similar to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering various choices and devices I could but I think I’m better that they only sent out a fundamental desk since as a basic desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a bunch of extras is the move when the core product isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot Standing Desk Monitor Mount
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and efficiency however I would spend the additional money it’s gon na require to enter a higher end manufacturer like uplift desk or extremely desk and I have not personally used very desk products so I can’t speak on it however their track record is very good big thanks to flexi spot for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged however from a client viewpoint you ‘d probably be really thrilled to get this in