today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk Review E7… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I mostly simply supervised) under an hour from start to finish.
It’s incredibly sturdy and can hold a great deal of weight. Check out the video below of it running while there’s an individual lying down on it if you don’t believe me.
The electrical raise/lower feature is not only easy to use and fast, however it’s also surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much thought.
On top of being functional, it likewise looks great in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also handy if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are much more budget friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of features that I wasn’t necessarily a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how durable the Flexispot is.
The practical cable television tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will require to buy an anti-fatigue mat to stay comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (since this implied it was going to be sturdy) and likewise a little hesitant (since we all understand how much of an obstacle putting together furnishings can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I like the streamlined look of this desk. I’m positive any of the many diverse surfaces that it is available in would look excellent in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, effective, and quiet to change between sitting and standing as many times as you desire throughout the day.
Finally, this desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or want to take a nap on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is quite fundamental I attempted to get as near to that as I might on uplifts website with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation however as you need to understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get doing not have even any cable grommets for pass through the outside container
for the desktop was not harmed in any way which is entirely bizarre because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just super rough man if I had actually acquired this I ‘d have been on the phone with customer support right away they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function unusually absolutely where any type of cable management products whatsoever the frame on this system is a single motor double phase design versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the dual phase double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this design does come standard with the control board that permits up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one advantage I would offer this unit over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% cheaper even if you update this flexi area test to the dual motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift however more affordable doesn’t mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is absolutely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged too my plan for this desk at this point is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at finest seems like a cheaper imitation of that it just doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to take a look at their website too which likewise feels strangely similar to among their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our valuable time covering various alternatives and devices I could but I think I’m happier that they just sent a fundamental desk because as a standard desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a bunch of bonus is the move when the core product isn’t what it need to be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot Standing Desk Review E7
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and productivity but I would spend the extra money it’s gon na take to enter into a greater end producer like uplift desk or extremely desk and I haven’t personally utilized extremely desk items so I can’t speak on it but their reputation is great huge thanks to flexi area for sending this out for evaluation sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters showed up harmed but from a customer perspective you ‘d most likely be actually delighted to get this in