today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk Set Height… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s very simple to assemble, and it took my 11-year-old child and I (I mostly just monitored) under an hour from start to finish.
It’s incredibly tough and can hold a great deal of weight. If you do not believe me, take a look at the video listed below of it operating while there’s an individual lying down on it.
The electrical raise/lower function is not just easy to use and quickly, however it’s likewise remarkably smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much idea.
On top of being practical, it also looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also useful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are much more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how strong the Flexispot is.
The practical cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this indicated it was going to be sturdy) and also a little reluctant (because we all understand how much of an obstacle assembling furnishings can be).
Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
Once assembled, I like the streamlined appearance of this desk. I’m confident any of the many diverse surfaces that it comes in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to switch in between sitting and standing as lot of times as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty home computer (or want to take a nap on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite standard I attempted to get as close to that as I could on uplifts site with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you must know by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get doing not have even any cable television grommets for go through the outdoors container
for the desktop was not damaged in any way which is absolutely bizarre due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just super rough guy if I had actually acquired this I ‘d have been on the phone with customer support right away they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function oddly definitely where any kind of cable television management materials whatsoever the frame on this unit is a single motor double stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded also to both the double phase dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come basic with the control board that allows for up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one advantage I would offer this system over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift but less expensive doesn’t indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s rub salt in the wound here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is absolutely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed also my prepare for this desk at this point is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furniture that will last you this at finest feels like a more affordable replica of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to check out their website as well which also feels strangely comparable to among their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering various choices and devices I might however I think I’m better that they only sent a fundamental desk because as a standard desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of bonus is the move when the core item isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot Standing Desk Set Height
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and productivity however I would invest the additional money it’s gon na take to enter a greater end producer like uplift desk or extremely desk and I have not personally used very desk products so I can’t speak on it but their credibility is excellent big thanks to flexi area for sending this out for evaluation sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters arrived damaged but from a consumer standpoint you ‘d probably be truly thrilled to get this in