today we’re taking a look at a motorized sit-stand desk…Sales Flexispot.Com… you may have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s very simple to assemble, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s very sturdy and can hold a lot of weight. Check out the video below of it operating while there’s an individual lying down on it if you do not believe me.
The electric raise/lower feature is not just easy to use and quick, however it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without offering it much thought.
On top of being practical, it likewise looks great in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also practical if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are much more inexpensive than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t always a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a consequence of how strong the Flexispot is.
The convenient cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfortable, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (considering that this meant it was going to be sturdy) and likewise a little reluctant (because all of us understand how much of a difficulty assembling furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
Once put together, I enjoy the smooth look of this desk. I’m positive any of the many diverse surfaces that it is available in would look great in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as often times as you want throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a significant home computer (or want to take a nap on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is quite fundamental I tried to get as close to that as I might on uplifts site with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation however as you ought to know by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get lacking even any cable grommets for travel through the outdoors container
for the desktop was not damaged in any way which is utterly bizarre because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough man if I had actually bought this I ‘d have been on the phone with customer support immediately they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely definitely where any type of cable television management products whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the double phase double motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come basic with the control board that allows for up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one benefit I would give this unit over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift but more affordable doesn’t suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged also my plan for this desk at this point is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at best feels like a more affordable replica of that it just does not feel quality and the difference between this desk and my primary desk is night and day do feel free to have a look at their site also which also feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering different options and devices I might however I think I’m better that they just sent out a fundamental desk because as a basic desk I’m not a fan of the quality control at this cost point and I don’t think slapping on a lot of additionals is the move when the core product isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Sales Flexispot.Com
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and performance but I would spend the extra money it’s gon na require to enter a greater end maker like uplift desk or very desk and I have not personally used really desk products so I can’t speak on it but their track record is very good big thanks to flexi area for sending this out for review regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters got here damaged but from a customer perspective you ‘d probably be really thrilled to get this in