today we’re having a look at a motorized sit-stand desk…Sit-stand Cubicle Standing Desk Flexispot M4W 41… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was very positive.
It’s very easy to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s incredibly strong and can hold a great deal of weight. If you do not believe me, have a look at the video below of it running while there’s a person lying down on it.
The electrical raise/lower function is not only easy to use and quickly, however it’s likewise remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much idea.
On top of being functional, it also looks terrific in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also handy if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more affordable than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is just a consequence of how sturdy the Flexispot is.
The convenient cable television tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (since this suggested it was going to be sturdy) and likewise a little reluctant (due to the fact that we all understand just how much of a challenge assembling furnishings can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
When put together, I enjoy the sleek appearance of this desk. I’m confident any of the many diverse finishes that it comes in would look great in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to switch in between sitting and standing as many times as you want throughout the day.
Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or want to take a nap on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite standard I tried to get as near that as I could on uplifts website with similar setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation however as you need to know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for travel through the outdoors container
for the desktop was not damaged in any way which is absolutely unusual because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just extremely rough male if I had actually bought this I ‘d have been on the phone with customer care immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function oddly absolutely where any kind of cable television management materials whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the double stage double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come standard with the control panel that allows for up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one benefit I would give this system over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper doesn’t imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that however the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged too my plan for this desk at this point is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furnishings that will last you this at finest seems like a less expensive imitation of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to have a look at their site also which likewise feels strangely similar to among their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our valuable time covering numerous alternatives and accessories I could however I believe I’m better that they just sent out a basic desk since as a fundamental desk I’m not a fan of the quality control at this rate point and I do not believe slapping on a bunch of extras is the relocation when the core item isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years really desk is 5 years and uplift desk is seven years if you are Sit-stand Cubicle Standing Desk Flexispot M4W 41
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and efficiency however I would invest the extra money it’s gon na require to enter into a greater end manufacturer like uplift desk or very desk and I have not personally utilized very desk products so I can’t speak on it however their reputation is great huge thanks to flexi spot for sending this out for evaluation regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters got here damaged but from a customer viewpoint you ‘d most likely be actually delighted to get this in